Setting Up a Bitcoin/Lightning Network Test Environment

Pierre Rochard has infected me with a zest for lightning development. As a web developer, my main focus is on building web apps that have Lightning payments enabled, rather than protocol-level or wallet-level work. However, in order to work on that, you need the whole stack below functioning properly so you can focus on your level in the stack. I quickly found that jumping into testnet payments is frustrating, because I spent more time getting nodes up and running and loaded up with testnet bitcoins and connecting to other nodes than actually coding on web apps. By using regtest, I can ensure a predictable Bitcoin and Lightning experience under the hood so I can focus on web development.

In this article I am going to walk through my Lightning setup using regtest, so that you can get up and running much faster than I did. This article assumes you have installed bitcoind and lnd.

What is Regtest?

The Bitcoin developer glossary defines regtest as such:

A local testing environment in which developers can almost instantly generate blocks on demand for testing events, and can create private satoshis with no real-world value.

Basically, you get to create your own Bitcoin network to test individual nodes and also how they operate together. For the sake of what we’re doing, we only need one node.

Setting Up Bitcoin

First things first, we need a Bitcoin node. When building a particular app, I like to put all node data directories in a single directory so that it is easier to find and point to particular resources along the way.

$ mkdir ~/app-container
$ mkdir ~/app-container/.bitcoin

Next, you’ll want to create a configuration file bitcoin.conf that goes in this directory:

rpcauth=<rpc auth username and password>

This tells Bitcoin Core to use regtest mode, run as a daemon, and keep an index of all transactions. It also sets up RPC authentication and ZMQ ports for LND to use to communicate with the node. To produce the value to enter for rpcauth, use the script found at ./share/rpcauth/ in the Bitcoin Core repo. In this article we’ll assume you are using the username lnd and the password lightning.

Finally, I like to make a bash alias to making calling these programs easier. Open up ~/.bash_profile and add this to the bottom.

export BITSTEIND_DIR="$HOME/app-container/.bitcoin"

alias bitsteind="bitcoind -datadir=$BITSTEIND_DIR"
alias bitstein-cli="bitcoin-cli -datadir=$BITSTEIND_DIR"

Be sure to update the path to whatever directory you had set Bitcoin up in. BITSTEIN_DIR, bitsteind, and bitstein-cli can be changed to whatever you prefer.

Save the file and load it in the shell by restarting the terminal or running source ~/.bash_profile.

Now, you can run your Bitcoin node from the terminal.

$ bitsteind

Go ahead and mine the easiest blocks you’ve ever tried to mine:

$ bitstein-cli generate 5

Coins are not spendable by miners until there are 100 confirmations, so let’s speed things along with more blocks.

$ bitstein-cli generate 101

Now you should see a positive balance:

$ bitstein-cli getbalance

Bitcoin is up and running! Learn more about available RPC commands here (hint: bitstein-cli stop will help you shut down).

Setting Up LND

Let’s make a directory for our LND nodes. Yes, nodes. We’re going to make two of them.

$ mkdir ~/app-container/.lnd
$ mkdir ~/app-container/.lnd2

Now let’s make configuration files. The first node can use default values, so it will be a simpler file. Save it as lnd.conf in the .lnd directory.




This tells LND about the Bitcoin node it is using and the RPC and ZMQ details for communicating. Since this is a local test environment, the password is not very secure. If you used a different password in the Bitcoin RPC auth script, be sure to update the value here.

Now we will make lnd.conf in the .lnd2 directory:

[Application Options]





This sets up different ports for network, RPC, and REST connections. The rest is the same. Once again, make sure you use the Bitcoin RPC username/password you used in the script earlier.

Now let’s set up some aliases.

export LND1_DIR="$HOME/app-container/.lnd"
export LND2_DIR="$HOME/app-container/.lnd2

alias lnd1="lnd --lnddir=$LND1_DIR";
alias lncli1="lncli -n regtest --lnddir=$LND1_DIR"

alias lnd2="lnd --lnddir=$LND2_DIR";
alias lncli2="lncli -n regtest --lnddir=$LND2_DIR --rpcserver=localhost:11009"

The CLI command has to know that the node is using regtest so it looks in the right path for the macaroons and TLS certs. The second node has a non-default RPC server, so we go ahead and set that in the CLI too. Thanks to aliases, we don’t have to type those out every time we make a command.

Running LND

Is your Bitcoin node still running? Good. Let’s get the Lightning nodes up. Open up a terminal window.

$ lnd1

We need to create or unlock the wallet. Open up another terminal window.

$ lncli1 create

Follow the prompt and save the mnemonic. Once again, this is a local test environment, so don’t worry much about security. There’s no real money at stake.

$ lncli1 getinfo

This should bring up some basic info about the node, a good barometer of if everything worked properly.

Next, do the same but with lnd2 / lncli2 .

Connecting the Nodes

If you run lncli1 listpeers , you’ll find out your node is still all alone. Let’s get them connected. Let’s get the second node’s information.

$ lncli2 getinfo

The output should have the following:

    "identity_pubkey": "02fea0a032d365dfabe00347bad493281172fcf30564f40b8a45da6bc176349a67",
    "alias": "02fea0a032d365dfabe0",
    "chains": [
    "uris": [
    "best_header_timestamp": "1549304792",
    "version": "0.5.1-beta commit=",
    "num_inactive_channels": 0

Let’s connect the first node to the second with the following command:

$ lncli1 connect 02fea0a032d365dfabe00347bad493281172fcf30564f40b8a45da6bc176349a67@localhost:9734

If you connect from the second node to the first, you’ll use port 9735 , which is the default.

Now run lncli1 listpeers again. Your output will be similar to this:

    "peers": [
            "pub_key": "02fea0a032d365dfabe00347bad493281172fcf30564f40b8a45da6bc176349a67",
            "address": "",
            "bytes_sent": "8764",
            "bytes_recv": "14968",
            "sat_sent": "0",
            "sat_recv": "600",
            "inbound": true,
            "ping_time": "499"

Now you’re ready to create a channel and send money.

Creating a Channel

To create a channel, first we need some bitcoins in our second node. Let’s get an address.

$ lncli2 newaddress np2wkh
    "address": "2N3CvQotjCttq1xE9seJJ1RdgrmXoepuyNP"

Now, send one of those hard-earned bitcoins you mined earlier to the node. We’ll generate some blocks to give it confirmations.

$ bitstein-cli sendtoaddress 2N3CvQotjCttq1xE9seJJ1RdgrmXoepuyNP 1
$ bitstein-cli generate 6

Now, we can open a channel. Let’s get the pubkey of the first node:

$ lncli1 getinfo

Start a channel using the value you get there. We’ll make the channel 100,000 satoshis:

$ lncli2 openchannel 026721a3077374a439d21d71987e63d8c111ea80272f37656580990757886765da 100000

Now mine some more blocks so the channel has adequate confirmations.

$ bitstein-cli generate 10

You should actually only need 3, but mining is fun.

Let’s see if it worked:

$ lncli1 listchannels
    "channels": [
            "active": true,
            "remote_pubkey": "026721a3077374a439d21d71987e63d8c111ea80272f37656580990757886765da",
            "channel_point": "a28e4fda3d21fb681ffeb2cc72ff84e5cfc60e30674d3b8df0ce1eec62087773:0",
            "chan_id": "131941395398656",
            "capacity": "500000",
            "local_balance": "600",
            "remote_balance": "490350",
            "commit_fee": "9050",
            "commit_weight": "724",
            "fee_per_kw": "12500",
            "unsettled_balance": "0",
            "total_satoshis_sent": "0",
            "total_satoshis_received": "600",
            "num_updates": "12",
            "pending_htlcs": [
            "csv_delay": 144,
            "private": false

Lightning enabled!

Creating and Sending an Invoice

Let’s round this out by sending a payment through our newly created channel.

$ lncli1 addinvoice -amt 100
    "r_hash": "9a8d4f2400ec802e01466e16f3e7e5b69e9d137101026f7bc0a7bcb47f909ad7",
    "pay_req": "lnbcrt1u1pw93syppp5n2x57fqqajqzuq2xdct08el9k60f6ym3qypx777q577tglusnttsdqqcqzys8dwa6ycaxvk70l0zkwek7f3canyv99uqxzlsxzyk0pual02wjc838utz5vv8e6zlzdlsdrnxrtnjw4u5688jrgswln0vfh0u8vjspmqq2ey0sj",
    "add_index": 34

Your add_index will be lower, since I’ve been creating many invoices already. Copy the pay_req value and take note of r_hash for later.

Let’s inspect the invoice on the other node:

$ lncli2 decodepayreq lnbcrt1u1pw93syppp5n2x57fqqajqzuq2xdct08el9k60f6ym3qypx777q577tglusnttsdqqcqzys8dwa6ycaxvk70l0zkwek7f3canyv99uqxzlsxzyk0pual02wjc838utz5vv8e6zlzdlsdrnxrtnjw4u5688jrgswln0vfh0u8vjspmqq2ey0sj
    "destination": "02fea0a032d365dfabe00347bad493281172fcf30564f40b8a45da6bc176349a67",
    "payment_hash": "9a8d4f2400ec802e01466e16f3e7e5b69e9d137101026f7bc0a7bcb47f909ad7",
    "num_satoshis": "100",
    "timestamp": "1549320321",
    "expiry": "3600",
    "description": "",
    "description_hash": "",
    "fallback_addr": "",
    "cltv_expiry": "144",
    "route_hints": [

Now let’s pay!

$ lncli2 payinvoice lnbcrt1u1pw93syppp5n2x57fqqajqzuq2xdct08el9k60f6ym3qypx777q577tglusnttsdqqcqzys8dwa6ycaxvk70l0zkwek7f3canyv99uqxzlsxzyk0pual02wjc838utz5vv8e6zlzdlsdrnxrtnjw4u5688jrgswln0vfh0u8vjspmqq2ey0sj
Amount (in satoshis): 100
Destination: 02fea0a032d365dfabe00347bad493281172fcf30564f40b8a45da6bc176349a67
Confirm payment (yes/no): yes
    "payment_error": "",
    "payment_preimage": "73b6dcd8d2f2df5ea0d3ded7facd2a277fdf0db0781a5dc8b00f7ff0e5972290",
    "payment_route": {
        "total_time_lock": 270,
        "total_amt": 100,
        "hops": [
                "chan_id": 131941395398656,
                "chan_capacity": 500000,
                "amt_to_forward": 100,
                "expiry": 270,
                "amt_to_forward_msat": 100000,
                "pub_key": "02fea0a032d365dfabe00347bad493281172fcf30564f40b8a45da6bc176349a67"
        "total_amt_msat": 100000

Let’s look up the invoice on the receiving node using the payment hash:

$ lncli1 lookupinvoice 9a8d4f2400ec802e01466e16f3e7e5b69e9d137101026f7bc0a7bcb47f909ad7
    "memo": "",
    "receipt": null,
    "r_preimage": "c7bc2NLy316g097X+s0qJ3/fDbB4Gl3IsA9/8OWXIpA=",
    "r_hash": "mo1PJADsgC4BRm4W8+fltp6dE3EBAm97wKe8tH+Qmtc=",
    "value": "100",
    "settled": true,
    "creation_date": "1549320321",
    "settle_date": "1549320499",
    "payment_request": "lnbcrt1u1pw93syppp5n2x57fqqajqzuq2xdct08el9k60f6ym3qypx777q577tglusnttsdqqcqzys8dwa6ycaxvk70l0zkwek7f3canyv99uqxzlsxzyk0pual02wjc838utz5vv8e6zlzdlsdrnxrtnjw4u5688jrgswln0vfh0u8vjspmqq2ey0sj",
    "description_hash": null,
    "expiry": "3600",
    "fallback_addr": "",
    "cltv_expiry": "144",
    "route_hints": [
    "private": false,
    "add_index": "34",
    "settle_index": "7",
    "amt_paid": "100000",
    "amt_paid_sat": "100",
    "amt_paid_msat": "100000"

Settled: true.

If you’re done, you can shut down the nodes:

$ bitstein-cli stop
$ lncli1 stop
$ lncli2 stop


This has been a quick walk through of my basic setup for a Bitcoin/Lightning test environment using regtest. In a future article, we’ll walk through how to connect this node to Python scripts and Flask web apps.

If you have any questions, suggestions, or errata to submit, my DMs are open on Twitter. I hope this helps you get your creative dev juices flowing like it did for me!